{"id":1809,"date":"2015-05-22T22:33:24","date_gmt":"2015-05-22T14:33:24","guid":{"rendered":"http:\/\/iswedding.no-ip.com\/wordpress\/?p=1809"},"modified":"2015-05-22T22:33:24","modified_gmt":"2015-05-22T14:33:24","slug":"installation-guide-of-astrophoto-program-for-raspbian","status":"publish","type":"post","link":"https:\/\/sampson.synology.me\/?p=1809","title":{"rendered":"Installation guide of Astrophoto program for Raspbian (Raspberry Pi2)"},"content":{"rendered":"

Download and install Raspbian first and then follow the guide for installation.<\/strong><\/span><\/span><\/h2>\n

Download Raspbian at https:\/\/www.raspberrypi.org\/downloads\/<\/a>
\nDownload\u00a0Win32DiskImager at http:\/\/sourceforge.net\/projects\/win32diskimager\/<\/a><\/p>\n

Write the image file into a 16G or above (class 10) micro SD card using the Windows tool “Win32DiskImager”
\nBoot up the Raspberry pi2 and open the terminal to install the programs by following the guide.
\nUpdate the apt packages
\n################################################
\nsudo apt-get update
\nInstall oacapture
\n################################################
\n#Goto http:\/\/www.openastroproject.org\/wp-content\/uploads\/2015\/03\/oacapture-0.4.0-raspbian.tar.bz2
\n#Download and extract oacapture-0.4.0-raspbian.tar.bz2
\ncd \/home\/pi
\nwget http:\/\/www.openastroproject.org\/wp-content\/uploads\/2015\/05\/oacapture-0.5.0-raspbian.tar.bz2
\nsudo tar -vxf oacapture-0.5.0-raspbian.tar.bz2
\nsudo apt-get install libqtcore4 libqtgui4 libv4l-0 libv4lconvert0 fxload libcfitsio3 libdc1394-22
\ncd oacapture-0.5.0-raspbian
\nsudo .\/install-binaries.sh
\n#Create a Launcher on the desktop that runs \/usr\/local\/bin\/oacapture
\nsudo ln -s \/usr\/local\/bin\/oacapture \/home\/pi\/Desktop\/Oacapture
\nCompile\/Install LinGuider
\n################################################
\n#Goto http:\/\/sourceforge.net\/projects\/linguider\/
\n#http:\/\/ncu.dl.sourceforge.net\/project\/linguider\/3.1.0\/lin_guider-3.1.0.tar.bz2
\n#Download and extract lin_guider-3.1.0.tar.bz2
\n#Goto http:\/\/sourceforge.net\/projects\/cccd\/files\/firmware\/
\n#http:\/\/jaist.dl.sourceforge.net\/project\/cccd\/firmware\/firmware-ccd_1.2_all.deb
\n#Download firmware-ccd_1.2_all.deb
\ncd \/home\/pi
\nwget http:\/\/ncu.dl.sourceforge.net\/project\/linguider\/3.1.0\/lin_guider-3.1.0.tar.bz2
\nwget http:\/\/jaist.dl.sourceforge.net\/project\/cccd\/firmware\/firmware-ccd_1.2_all.deb
\nsudo dpkg -i firmware-ccd_1.2_all.deb
\nsudo tar -xvf lin_guider-3.1.0.tar.bz2
\ncd lin_guider_pack\/io_ftdi\/
\nsudo apt-get install libftdi-dev g++
\n.\/build.sh
\ncd \/home\/pi\/lin_guider_pack\/lin_guider\/
\nsudo apt-get install fxload libusb-dev libqt4-dev libusb-1.0
\n.\/configure
\nmake
\nsudo cp .\/lin_guider \/usr\/local\/bin\/
\n#Create a Launcher on the desktop that runs \/usr\/local\/bin\/lin_guider
\nsudo ln -s \/usr\/local\/bin\/lin_guider \/home\/pi\/Desktop\/LinGuider
\nInstall OpenSkyImager
\n################################################
\n#Goto https:\/\/github.com\/OpenSkyProject\/OpenSkyImager\/archive\/master.zip
\n#Download and extract master.zip
\ncd \/home\/pi
\nwget https:\/\/github.com\/OpenSkyProject\/OpenSkyImager\/archive\/master.zip
\nunzip master.zip
\ncd OpenSkyImager-master
\n#install_OSI.bash will install all that is needed to use QHY camera series
\n#install_OSI_full.bash will add SBIG (unidrv) support
\n#sudo .\/install_OSI_full.bash
\nsudo .\/install_OSI.bash
\nInstall x11vnc
\n################################################
\nsudo apt-get install x11vnc
\nx11vnc -forever -display :0
\n#x11vnc auto start up on boot
\ncd \/home\/pi\/.config
\nsudo mkdir autostart
\ncd autostart
\nsudo nano x11vnc.desktop
\n### Paste the following text into the file #####
\n[Desktop Entry]
\nEncoding=UTF-8
\nType=Application
\nName=X11VNC
\nComment=
\nExec=x11vnc -forever -display :0
\nStartupNotify=false
\nTerminal=false
\nHidden=false
\n################################################
\n### Save the file and logout
\n### Reboot the pi
\n### Connecting to the Raspberry Pi with Real VNC Viewer on Andriod or Windows
\n#Setup AP mode using Edimax EW 7811un
\nwget https:\/\/github.com\/jenssegers\/RTL8188-hostapd\/archive\/v2.0.tar.gz
\ntar -zxvf v2.0.tar.gz
\ncd RTL8188-hostapd-2.0\/hostapd
\nsudo make
\nsudo make install
\nsudo service hostapd restart
\nsudo nano \/etc\/hostapd\/hostapd.conf
\n### Paste the following text into the file #####
\n# Basic configuration
\ninterface=wlan0
\nssid=RPi2
\nchannel=1
\n#bridge=br0
\n# WPA and WPA2 configuration
\nmacaddr_acl=0
\nauth_algs=1
\nignore_broadcast_ssid=0
\nwpa=2
\nwpa_key_mgmt=WPA-PSK
\nwpa_pairwise=CCMP
\nrsn_pairwise=CCMP
\nwpa_passphrase=1234512345123
\n# Hardware configuration
\ndriver=rtl871xdrv
\nieee80211n=1
\nhw_mode=g
\ndevice_name=RTL8192CU
\nmanufacturer=Realtek
\n################################################
\nsudo apt-get install dnsmasq
\nsudo nano \/etc\/dnsmasq.conf
\n############# ADD #############
\ninterface=wlan0
\nexpand-hosts
\ndomain=local
\ndhcp-range=10.0.0.10,10.0.0.20,24h
\ndhcp-option=3,10.0.0.1
\n###############################
\nsudo nano \/etc\/network\/interfaces
\n###############################
\nauto lo
\niface lo inet loopback
\niface eth0 inet dhcp
\n#allow-hotplug wlan0
\n#iface wlan0 inet manual
\n#wpa-roam \/etc\/wpa_supplicant\/wpa_supplicant.conf
\n#iface default inet dhcp
\niface wlan0 inet static
\naddress 10.0.0.1
\nnetwork 10.0.0.0
\nnetmask 255.255.255.0
\nbroadcast 10.0.0.255
\n###############################
\nsudo nano \/etc\/rc.local
\n###############################
\nifup wlan0
\nsudo service dnsmasq restart
\nsudo service hostapd restart
\necho 1 > \/proc\/sys\/net\/ipv4\/ip_forward
\n#iptables -t nat -A POSTROUTING -j MASQUERADE
\n###############################<\/p>\n","protected":false},"excerpt":{"rendered":"

Download and install Raspbian first and then follow the guide for installation. Download Raspbian at https:\/\/www.raspberrypi.org\/downloads\/ Download\u00a0Win32DiskImager at http:\/\/sourceforge.net\/projects\/win32diskimager\/ Write the image file into a 16G or above (class 10) micro SD card using the Windows tool “Win32DiskImager” Boot up the Raspberry pi2 and open the terminal to install the programs by following the guide. … <\/p>\n

Continue reading “Installation guide of Astrophoto program for Raspbian (Raspberry Pi2)”<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[23,24,14,16],"tags":[31,81,82,97,98,110,138],"class_list":["post-1809","post","type-post","status-publish","format-standard","hentry","category-23","category-24","category-interest","category-it-info","tag-auto-guide","tag-linguider","tag-linux","tag-oacapture","tag-openskyimager","tag-raspberry-pi2","tag-x11vnc"],"_links":{"self":[{"href":"https:\/\/sampson.synology.me\/index.php?rest_route=\/wp\/v2\/posts\/1809","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sampson.synology.me\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sampson.synology.me\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sampson.synology.me\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/sampson.synology.me\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1809"}],"version-history":[{"count":0,"href":"https:\/\/sampson.synology.me\/index.php?rest_route=\/wp\/v2\/posts\/1809\/revisions"}],"wp:attachment":[{"href":"https:\/\/sampson.synology.me\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1809"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sampson.synology.me\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1809"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sampson.synology.me\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1809"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}